Applications in pharma, biotech and foodstuff equipment
To foodstuff and pharmaceutical industries, Betech offers raw materials and manufacturing methods compliant with the following categories of approvals, standards and regulations:
To foodstuff and pharmaceutical industries, Betech offers raw materials and manufacturing methods compliant with the following categories of approvals, standards and regulations:
| Foodstuff | Potable Water |
| BSE/TSE | DVGW/KTW |
| FDA | W-270 |
| BFR | W-534 |
| EU 1935/2004* | WRC1/WRAS |
| EU 10/2011 | KIWA |
| DGCCRF | ACS XP P 41-250 |
| EN 2023/2006 GMP* | UBA - Elastomer Guideline |
| GB 31603-2015 GMP | BEK 1007 (DK) |
| GB 4806.1/6/11 2016 | |
| GB 9685-2016 A1/A3 | |
| COS-PS | |
| BEK 1248 (DK) |
| Pharma & Biotech | |
| USP VI Class VI | |
| ISO 10993-1 | |
Betech’s production and inventory is registered with the smiley scheme administrated by the Ministry of Environment and Food of Denmark.
See examples of applications and product types relating to the foodstuffs and pharmaceutical industries below.
Production facilities and piping systems for liquid media in laboratories and production lines within the processing industry, the food industry and the production of pharmaceuticals are subject to very strict cleanliness and hygiene standards. Almost without exception, these standards require the use of stainless steel tubing. Certified clamp gaskets are ideal for this application, partly because they enable easy and safe maintenance of the system.
Movements from thermal extension, vibrations and reaction forces are an inevitable factor in processing and production lines. Compensators in the form of flexible flanges and tube joints absorb or control this type of movement, preventing damage to the piping system.
Sizing and use of clamp gasket
Compensators made of stainless steel
Pumps are composite structures with both static and dynamic applications.
When pumps are used in professional production facilities, there are very high standards for operational safety and performance. The cross-section diagram indicates the location inside the pump of the most critical seals.
Cable Glands
Tanks and receptacles are widespread in the pharmaceutical industry. Tank design may be relatively simple (with few connections, no or few hatches) or complex (many connections of tubes and measurement tools, hatches, glass view ports, etc.).
Pressure, media and temperature are critical factors when choosing seals, in addition to the special requirements concerning cleaning and cleanliness that usually apply.
In dragé and mixing machines, the rotating shaft is often sealed using oil seal rings. In addition to dynamic applications, these food production machines may also require static seals at tube flanges, inside ingredient containers, around lids and behind control panels.
Because these machines are used in environments where there is a combination of electricity, heat generation and water, it can be advantageous to use fire-safety approved seals and gaskets.
O-Rings - used as static or dynamic seals
Flange gaskets - also fire resistant types
Machines that are used for portioning, slicing, dosing and packing have several static seals and, depending on the design and function of the machine, there may also be a broader requirement for dynamic seals.
In addition to the gasket and seal products that are also used in dragé and mixing machines, we also provide bellow-type protective seals to cover moving machine parts and anti-slip machine feet to provide appropriate levels of stability.
O-Rings - used as static or dynamic seals
Flange gaskets - also fire resistant types
*: Betech supplies rubber products intended for contact with foodstuffs, in compliance with EU Regulation no. 2023/2006 of 22 Dec. 2006 and EU Regulation No 1935/2004 of 27 Oct. 2004. An assessment and approval is conducted based on EU resolution “Rubber products intended to come into contact with foodstuff” version 1 10 Jun. 2004.
|
||
