Mobile Logo

Explore our range!

Take a glance at our wide range and find inspirational examples from an almost limitless universe of gaskets, seals and functional parts.

 
 
 
 
 
 
 
 

Gasket w. mica, fibre and steel reinforced FJ 2602

FJ2602 consists of a tanged stainless steel core with a layer of fiber-reinforced mica material applied to both sides. The core is made of a 0.20 mm thick stainless steel sheet (material 1.4828). Apart from expanded mica, the coating contains high-temperature-resistant fibers and a small amount of high-quality elastomers as binding agents.

Due to the use of mica and the heat-resistant 1.4828 mm stainless steel core, FJ2602 withstands high temperatures up to 950 °C.

This combination gives FJ2602 an excellent sealing potential over the full temperature range. Its high compressibility and elasticity gives it good adaptability, allows it to compensate optimally for component distortions (macro-adaptation), and it also displays constant material behaviour under alternating operating conditions. The tanged steel core lends the material a high resistance to pressure, i.e. low setting tendency.

FJ2602 is resistant to media such as oils, fuels, exhaust gases, antifreeze, and many others.


Applications

As a material for the exhaust system in any IC engine (e.g. truck engines, marine diesel engines, gas engines) for fitting between the cylinder head and manifold, and in the downstream flanged joints of exhaust systems, for turbocharger seals or EGR (exhaust gas recycling) gaskets, especially for the purpose of complying with stringent emission limits.

It may also be used for sealed joints on burners in heating systems, high-temperature heat exchangers, gas turbines, and other applications.

For extreme mechanical loads and sealing requirements, we recommend the use of a stainless steel inner bead. In addition to increased internal pressure loading capability, cross-sectional sealing, and blow-out safety, it also provides improved resistance to chemicals.


Approvals

  • Germanischer Lloyd (DNV GL)
    Approval for shipbuilding

 

Typical Applications

Diesel engine
Construction machine
Gas turbine
Cogeneration plant
Manifold
Marine
Natural gas
Offshore
Oil and gas
Process plant
Process equipment
Pump
Pipe flange
Scrubber
Steel pipe
Exhaust system

Certificates

DNV-GL (Germanischer Lloyd)

Quality (QA) & Pre-qualification

ISO 9001:2008
JQS Achilles (Oil & Gas)
Sellihca (Utillities)

Raw Materials

Compressed Mica mineral sheet, Standard | CS-micS

Weather resistance (relative)
Average
Ozone resistance (relative)
Excellent
Oil resistance (relative)
(no spec.)
Water resistance (relative)
Average
Wapor resistance (relative)
Average
Acids resistance (relative)
Average
Bases resistance (relative)
Average
Gas permeability (relative)
Limited
Tensile strength (relative)
Limited
Max. Operating temperature (Celsius)
900
Min. Operating temperature (Celsius)
0
Max. Surface pressure (bar)
0
Min. Surface pressure (bar)
0
Max. Working pressure (bar)
5

Accept cookies

This website uses cookies to track your behavior and to improve your user experience.
You can always delete saved cookies by visiting the advanced settings of your browser. About cookies on this site ...